FENSPORT BRAND NEW CELICA GENERATION 7

2.0L TURBO, 4 WHEEL DRIVE, 3SGTE ENGINE.

576BHP @ Hubs

10.27 quarter mile @ 139mph (TOTB 2008)

196mph from a standing start in 1 mile!!!

NEW CELICA WITH 4 WHEEL DRIVE

 

Having created the UK`s fastest Front & 4wd wheel drive Corolla`s, we decided it was time for a change in direction and try something new, but we still wanted to retain that "shock factor" that our corolla is so famous for, so we decided to build a celica - the new celica, the generation 7.

We wanted to create the best all round track / drag celica the UK has ever seen so we started with the generation 7 TRD M Sport. This limited edition special model is factory strengthened for motorsport use, making it an ideal base, it is also much lighter than the previous celica gt4 models .

We started the theory side of the project back in august 05 and started measuring and working out what parts may fit or be required. Then in October 2005 the real work started with delivery of the car and the very first job was the 4wd conversion and the 3sgte engine installation, this was acomplished using a variety of standard toyota parts from the celica, the 4wd corolla and the GT4.

By keeping many items similar to our corolla we hope to be competetive from the start.

The car has been built with all round performance in mind, it will compete in a wide range of events including Ten of the Best, Time Attack and Drag Racing Events.

The car has been extensively modified throughout, please take a look at the pictures below for an insight into how such a project has been acheived and also see below tech spec for a brief rundown on the modifications so far!

Have a look below at the original build photo's and complete spec sheet

 

October 2005 - Bare shell time!
note - horn and chassis plates - even these had to be moved later	All underseal and sound deadening removed
November 2005 4wd & 3sgte conversion
Dummy 3sgte fits easy without ancillaries!	Rear crossmember modified to suit st205 rear differential
December 2005 Roll cage & fuel tank / radiator / intercooler / front panel
Fully tig welded integral roll cage	HKS Supra intercooler and steel front bumper bar
January 06 - Plumbing / Inlet manifold / engine bay build / Fuel system
February - Turbo setup / paintwork / suspension / intercooler pipes / wi
March - bonnet / engine and car wiring, fire system, exhaust / ecu & dash
April - glass / Interior & Brakes & final build	May - start/setup/map - race!

 

 

FENSPORT 4WD NEW CELICA TECH SPEC

CHASSIS:

The floorpan of the car has been slightly altered to accept propshaft centre mount and an exhaust tunnel, the rear spare wheel well has been removed, and the fuel system installed where the back seat once was. No chassis rails have been cut, however 2 towers welded in to locate 4wd corolla rear subframe, which is modified to accept the GT4 rear differential. The rear hubs are also from the corolla 4wd.

Front Crossmember is from corolla 4wd and modified for 3sgte engine /transmission, all engine mounts are custom made.

Front radiator support panel has been replaced with T45 steel member to straighten up both intercooler and radiator to aid airflow and also increase engine bay space.

The A,B & C pillars are strengthened via extra spot welding at the facory by TRD.

The extensive roll cage is a fully tig welded wrc type multi point, links to front turrets, transmission tunnel, rear turretts and double X door bars. The under dash bar is also incorporated into the cage.

The front bumper bar is replaced with T45 steel

The rear bumper bar is lightweight alloy

2 extra rear chassis stiffening underbraces in aluminium support carbon boot floor.

All underseal and sealant removed.

Doors lightened and internal door bars removed, 8.5kgs per door saved, electric windows and glass retained.

ENGINE:

The engine is the 3SGTE, 2.0 litre twincam 16 valve turbo, as used in both the MR2 Turbo and Celica GT4, using a TTE Group 'A' block and stroker crankshaft, capacity is increaseed to 2.1 litres. Crower steel connecting rods with custom JE Forged Pistons, ARP Bolts, metal headgasket, Lightweight alloy pulleys.

Fensport Racing ported and flowed cylinder head with racing valves and double valve springs, TTE vernier pulleys and Piper/Fensport custom camshafts.

The inlet manifold is completely custom made to suit the new celica installation and has a short runner design with internal ram pipes and a 75mm throttle body.

The fuel system is completely custom and installed where the rear seat would have been, The tank is alloy and foam filled, holley lift pump, swirl pot then aeromotive main pump, -10 braided fuel lines, 1000cc injectors and aeromotive fuel pressure regulator.

New for 2008 is Turbo Dynamics latest specification Garrett GT35/42 Ball bearing unit, mounted on a Corolla WRC manifold modified to accept a TIAL 44mm remote wastegate with screamer pipe.

The exhaust system is stainless steel, using 90mm mandrel bent pipework from turbo to single back box with a Blitz Nur Spec R custom rear silencer.

GT4 alternator modified with corolla regulator and Fensport alloy oversize pulley, TTE wrc alloy mount with carbon adjustment bracket..

Custom breather system with stainless braided pipework leading to a custom alloy tank with oil return line. Also incorporates the power steering resevoir.

COOLING:

A Blitz front mounted intercooler, from the supra JZA80, is used with custom made "lightweight thin wall" 0.9mm stainless steel 3" piping and Samco silicon hosing.

The ERL water injection system is controlled by motec, and keeps the intake charge cool, a Digital dash display 3 informs the driver of water flow.

The cooling system has a custom alloy radiator, electric water pump, alloy header tank, swirl pot, a trd low temp thermostat and Evans coolant.

Twin oil coolers with braided lines and thermostat.

Gearbox oil coolers

Samco Hoses

 

TRANSMISSION:

Fensport Racing Triple plate clutch with lightweight flywheel

Fensport Racing 5 speed straight cut, dog gearbox with a low ratio 4.4 straight cut final drive. Ikea sequential shifter.

Cusco MZ plate type Rear LSD

TRD rear differential front mounts, Fensport Racing uprated rear diff mount.

Propshaft retaining rings.

 

SUSPENSION:

The Front suspension is AST 3 way adjustable coilovers with camber adjustable top mount

Superflex front wishbone bushes and anti roll bar bushes.

Whiteline anti lift and increased castor wishbone bushes.

Rear suspension uses AST 3 way adjustable coilovers

Whiteline adjustable anti-roll bar with poly bushes from a MR2 turbo is mounted behind the axle..

Whiteline adjustable droplinks.

C-one lower rear arm bushes

 

BRAKES:

Front - Tarox 10 pot GT caliper with 340mm discs

Rear - Tarox 6 pot caliper with 280mm discs

Braided steel lines throughout, all lines inside.

In car adjustable brake proportioning valve.

WHEELS & TYRES:

Volks Racing TE37, 7 .5 X 17 ET35 with Toyo R888 tyres 215/45 for circuit and 225 for drag, Toyo T1-R 215/45 wets.

ELECTRICS:

MoTeC M400 Pro ECU is used to control the engine as well as Boost Control, Water injection, Full throttle gearchange, Launch control, Data logging and Wide band Lambda.

Motec digital Sport Dash displays all ecu parameters as well as speedo, gear position, shift lights, warning lights, oil pressure, fuel pressure, engine oil temp, gearbox oil temp, and rear differential oil temp.

Custom wiring loom throughout.

FIA electric cut out switch

INTERIOR:

Interior - Fully trimmed with flocked dash & interior plastics,headlining and carpet, custom made door and rear panels.

Recaro Profi Race seats (6kgs), Momo quick release steering wheel

Schroth 5 point harnesses.

Spa firefighter 4kg plumbed in electric fire system, 3 engine bay and 3 interior extinguisher jets.

Battery relocated behind passenger seat.

Alloy Water Injection and washer tanks in boot.

BODY:

Varis Carbon fibre bonnet, with scoop for turbo clearance

Carbon roof scoop.

GT front bumper modified for more airflow and C-one front spoiler

Seibon Carbon fibre tailgate with tinted plexiglass

GT side skirts

Varis GT Carbon rear wing

TRD M sport rear bumper corners

More soon ................................... :-)

 

2006 spec - Power Graph