ENGINE TUNING
UK & EU Customers Please add VAT to all Prices
 |
Platinum
Sparkplugs - heat range 6 & 7 are available
|
 |
£5.95
each
|
|
|
|
Iridium
Sparkplugs - heat range 6, 7, 8 & 9 are available
|
|
£7.95
each
|
|
 |
Iridium
Sparkplugs - heat range 7&8 are available
|
|
£12.50
each
|
|
 |
Iridium
Sparkplugs - heat range 6,7 & 8 available
|
|
£12.50
each
|
|
 |
Full
suppression 8mm blue silicon leads complete with original ends
|
|
£49.95
|
|
| Full suppression 8.5mm red silicon leads complete with original ends - To order |
£62.95
|
|||
|
|
High Flow Sports Oil Filters |
 |
£14.80
|
|
|
High Performance Foam Air Filter |
 |
£24.50
|
|
|
|
Special cleaning kit for the RAMAIR Air Filter |
£4.99
|
||
 |
Blitz/Fensport SUS Power Induction filter Kit, with Air Flow Meter Adapter |
 |
£125.00
|
|
|
|
Blitz SUS Power LM filter Element - fits directly into original airbox |
 |
£26.00
|
|
|
|
CNC Machined, Piston type DumpValve designed to work with air flow meters, Small enough to weld direct to intercooler, or remote mount. |
 |
£75.00
|
|
|
|
Comes
with fitting Instructions. Easy and cost effective way of removing the
Boost cut. The item has a 4 wire connection just ahead of the ECU making
it very simple to install
|
£95.00
|
||
|
|
Improved
Design featuring a locking mechanism. Easy to use just set desired pressure
then lock (No more unwanted adjustments)
|
£27.50 |
||
|
|
Electronic Boost Controller - Spec S - Single solenoid |
£219.00
Info
|
||
|
|
Electronic Boost Controller -Spec R - Dual solenoid |
£310.00
Info
|
||
|
|
Electronic Boost Controller - SBC-ID Boost Controller II - Dual solenoid |
£360.00
Info
|
||
|
|
MMD I-Colour, Display upgrade for SBC-ID boost controller |
£290.00
|
||
|
|
Electronic Boost Controller - SBC I-Colour |
£499.00
|
||
|
|
AF Analyser - allows you to read wide band lambda, works with the MMD I - Colour or SBC I-Colour |
£360.00
|
||
|
|
Power meter SJ |
£110.00
|
||
|
|
Alloy Power Steering Pulley, CNC machined, Light weight and oversized to reduce power loss. |
 |
£39.95
|
|
|
|
Oversize belt for above pulley (780) |
£5.95
|
||
|
|
Alloy Alternator Pulley, CNC machined, Light weight and oversized to reduce power loss. Also available in standard size - special order only |
 |
STD
£32.00
|
|
|
O/SIZE
£34.00
|
||||
|
Power
Boost Valve
|
Adjustable
Fuel Pressure Regulator with remote mounting kit, ideal for use with
standard type fuel lines.
|
 |
£86.00
|
|
|
|
High capacity Fuel pump kit 255L/HR |
£79.80
|
||
 |
Adjustable fuel pressure regulator - ideal for use with upgraded fuel lines |
£115.00
|
||
|
|
Front Mounted Intercooler Kit, This is a DIY intercooler kit with 54mm stainless mandrel bent bends and samco hosing, giving you the major parts required to manufacture your own kit. Intercooler core 1 (pictured) is 650 x 165 x 80mm and fills lower grill area perfectly. Intercooler core 2 is 600 x 300 x 80 and suits RC/CS front bumper. Alternative Intercoolers can be made to customer drawing. |
 |
Core
1
£575.00
|
|
| Core
2
£625.00
|
||||
UPRATED ENGINE INTERNALS - 3SGTE ENGINE
|
|
Camshafts - Various specifications - Please enquire |
£265.00
Each
|
|
|
|
Adjustable Cam Gears |
 |
£95.00
Each
|
|
|
Valve spring set |
£142.00
|
|
|
Fidanza
|
Lightweight
Alluminium Adjustable Cam Gears
|
 |
£186.00 pair |
 |
JE Forged Piston Kit - (complete with Rings, Pins and clips - not shown) - 3 bore sizes available |
 |
86.0mm
£485.00
|
|
86.25mm
£CALL
|
|||
|
86.5mm
£399.00
|
|||
 |
Ross Forged Piston Kit (complete with Rings, Pins and clips - not shown) - bore size 86mm & 86.5mm |
|
All
sizes £425.00
|
|
|
Steel Cylinder Head Gasket |
 |
1.2mm
£110.00
|
|
1.4mm
£110.00
|
|||
|
|
Steel Cylinder Head Gasket |
|
1.0mm
£185.00
|
|
1.6mm
£195.00
|
|||
 |
Uprated Cylinder Head stud kit |
 |
£114.03
|
|
Fidanza
|
Lightweight
Alluminium Flywheel
|
 |
£265.00 |
|
|
Uprated Flywheel Bolt Kit |
£41.46
|
|
|
Carillo
|
Carillo Steel Conrods with bolts |
£599.00
|
|
|
|
Uprated Conrod Bolt Kit |
£34.65
|
|
|
|
Uprated Main Bearing Bolt Kit |
£84.85
|
|
|
|
Group 'A' mains & big end bearings - 3 sizes available |
£POA
|
|
** NOTE: The heads on the Group `N` bolts have larger heads than standard, and may need to be turned down to fit some headcastings.
For Standard engine parts - please see "Engine Section"
PERFORMANCE PACKAGES
Packages designed to give you an idea on where to start ( all parts available seperately above)
|
Stage 1 9 Psi |
Conversion consists of Ramair Air Filter and Alloy Bleed Valve to increase boost to around 9 Psi whilst still retaining the Factory ECU - Phone for details |
£66.00 |
|
|
Stage 2 +30 bhp |
FuelBoost Cust Defenser, Air Filter and Alloy Bleed Valve with Colder Grade Sparkplugs. Boost increases to 15 Psi |
£180.00 |
|
|
Stage 3 + 40 bhp |
As Stage 2 but with Scorpion Exhaust, greatly improves midrange torque and reduces Turbo lag. Further improvements can be had by removing the Cat |
£505.00
|
|
|
Stage 4 +??? bhp |
Taylor made conversion packages to suit many tastes and budgets |
£POA
|
|
REBUILT/UPRATED TURBOS
All Turbos are only available on Exchange £100 surcharge applies
|
Stage 0 |
Completely rebuilt using genuine new parts as required - Fully balanced to OE standards |  |
£475.00
|
|
Stage 1 |
Completely rebuilt using New steel shaft & genuine new parts as required - 48mm compressor wheel, with a 12psi uprated actuator - ideal up to 1.2 bar boost. |  |
£695.00
|
|
Stage 2 |
Completely rebuilt using New steel shaft & genuine new parts as required - 360 degree thrust, 48mm compressor wheel with a 12 psi uprated actuator - The choice for serious power - ideal for cars running more than 1.2bar boost. |  |
£795.00
|
ERL WATER INJECTION KITS
|
Recent
testing of Water Injection Systems have shown a stunning average reduction
of 24 degrees @ 18psi boost pressure. Show me an Intercooler upgrade
that can match this for price and performance
|
|
System 1s |
Comes with Race Pump, 3 jets and a Pressure Switch. Also included is all required hosing, relay and wiring. Ideal for Fast Road applications |
 |
£320.00
|
|
System 2c |
As with the '1s' kit above but also with High Speed Injector Valve for use with and Re-Programmable ECU |
 |
£420.00
|
|
System 2s |
As with the '1s' kit but also includes programmable MF2 Controller |
 |
£575.00
|
|
DDS2 |
Digital Dash Display System - This kit provides a Flow Sensor as well as a Led dash display unit, which provides the driver with vital flow information, helping to diagnose any problems with either blocked jets or lack of water for any reason - Highly Recommended for use with any of the above WI kits. |
 |
£107.00
|
ENGINE MANAGEMENT
|
|
M4 ECU with Base map |
 |
£899.00 |
|
|
D9 Communication Lead |
£26.00
|
|
|
BOSCH |
Air temperature sensor - for inlet air temp |
£19.00
|
|
|
BOSCH |
Plug for Air temperature sensor |
£5.00
|
|
|
GM |
3 Bar map sensor - up to 2 bar boost |
£85.00
|
|
|
The above is all that is needed to run a ST185 without the airflow meter Below are upgrade and fitting / mapping options available |
|
||
|
|
To install and map above - 1 day session suits most mildly modified vehicles (Airflow meter removal included, but any parts/air filters etc are at extra cost) |
£320.00
|
|
|
|
Future mapping sessions |
£45/HR
+ Expenses
|
|
|
|
Bruntingthorpe Proving Ground - Hire charge is £50+ vat per hour and a minimum of 2 hours apllies. Brutingthorpe is an ideal place to map extreme power cars or non road legal competition cars. Mapping charge is £45/HR + 2 hours travelling expenses. |
£
|
|
|
|
Boost control valve |
£49.00
|
|
|
|
4 Bar map sensor - up to 3 bar boost |
£142.00
|
|
|
|
10 Position resistive rotary switch (Ideal for in car boost, ignition trim adjustment) |
£100.00
|
|
|
|
Thermocouple kit (For Exhaust Gas Temperature) - consisting of Probe, Amplifier and plugs |
£175.00
|
|
|
|
M4 PRO Upgrade - Data logging, Advanced Tuning, Anti lag, Launch Control etc |
£235.00
|
|
|
|
M4 Lambda Upgrade - (Pro upgrade a pre-requisite) |
£200.00
|
|
|
BOSCH |
Wideband Bosch Lambda Sensor |
£145.00
|
|
|
|
Lambda Boss & Bung |
£16.00
|
|
|
|
Professional Lambda meter, complete with wiring loom and lambda sensor |
£913.00
|
|
UK & EU Customers Please add VAT to all Prices