ENGINE TUNING
UK & EU Customers Please add VAT to all Prices
 |
Platinum
Sparkplugs - heat range 6 & 7 are available
|
 |
£5.95
each
|
|
|
Iridium
Sparkplugs - heat range 6, 7, 8 & 9 are available
|
|
£7.95
each
|
 |
Iridium
Sparkplugs - heat range 7&8 are available
|
|
£12.50
each
|
 |
Iridium
Sparkplugs - heat range 6,7 & 8 available
|
|
£12.50
each
|
 |
High Performance Ignition Lead Kit - 5mm Red Silicon |
£59.95
|
|
|
High Performance Foam Air Filter Element |
 |
£26.50
|
|
|
Special cleaning kit for the RAMAIR Air Filter |
£4.99
|
|
|
|
Blitz Stainless Steel Mesh Air Induction kit |
 |
£175.00
|
|
|
Blitz SUS Power LM filter Element - fits directly into original airbox |
 |
£26.00
|
 |
Alloy
Bleed Valve - Improved Design featuring a locking mechanism. Easy to
use just set desired pressure then lock (No more unwanted adjustments)
|
£27.50 |
|
|
|
Blitz Super Sound Dump Valve - Complete kit |
 |
£185.00
|
 |
Super sequential blow off valve |
 |
£215.00
|
|
|
High Flow Sports Oil Filters |
 |
£13.60
|
|
|
TRD Low Temperature Sports Thermostat, opening temperature is reduced to 71 degrees C. |
 |
£46.50
|
|
|
Speed
Limit Defencer - removes speed cut on import models
|
£95.00
|
|
|
|
Electronic Boost Controller - Spec S - Single solenoid |
£219.00
Info
|
|
|
|
Electronic Boost Controller -Spec R - Dual solenoid |
£310.00
Info
|
|
|
|
Electronic Boost Controller - SBC-ID Boost Controller II - Dual solenoid |
£360.00
Info
|
|
|
|
MMD I-Colour, Display upgrade for SBC-ID boost controller |
£290.00
|
|
|
|
Electronic Boost Controller - SBC I-Colour |
£499.00
|
|
|
|
AF Analyser - allows you to read wide band lambda, works with the MMD I - Colour or SBC I-Colour |
£360.00
|
|
|
Silicone Turbo to Intercooler hose kit (1 hose) |
£6.00
|
|
|
Hose
Clips
|
2 x Stainless Steel Hose Clips - for above intake hoses |
£3.00
|
|
|
|
Silicone Radiator hoses ( 2 hoses -top & bottom rad hose) |
 |
£72.56
|
|
Hose
Clips
|
4 x Stainless Steel Hose Clips - for above intake hoses |
£4.60
|
|
|
|
Silicone Intake hoses (1 hose -from air filter to turbo) |
 |
£99.00
|
|
Hose
Clips
|
3 x Stainless Steel Hose Clips - for above intake hoses |
£5.06
|
|
|
|
Alloy Oil Breather/Catch Can, with oil drain plug & sight level, 1 Litre capacity. Outlets can be left or righthand..Now chrome plated |
 |
£85.00
|
|
Pipercross
|
Pipercross Breather filter - Blue/red/Polished available |
 |
£18.00
|
|
Power
Boost Valve
|
Adjustable
Fuel Pressure Regulator with remote mounting kit, ideal for use with
standard type fuel lines.
|
 |
£86.00
|
|
|
Adjustable fuel pressure regulator - ideal for use with upgraded fuel lines |
£115.00
|
|
|
|
High capacity Fuel pump kit 176L/HR |
£76.90
|
|
|
|
High capacity Fuel pump kit 255L/HR |
£79.80
|
|
 |
850cc side feed injectors - with fitting kit for original fuel rail |
 |
£105.00
Each
|
|
|
Top Feed Injectors 1000cc (requires fuel rail upgrade) |
£145.00
Each
|
|
|
|
Fuel rail upgrade for above top feed injectors |
£225.00
|
|
|
|
Alloy Power Steering Pulley, CNC machined, Light weight and oversized to reduce power loss. |
 |
£39.95
|
|
|
Oversize belt for above pulley (780) |
£5.95
|
|
|
|
Alloy Alternator Pulley, CNC machined, Light weight and oversized to reduce power loss. Also available in standard size. |
 |
STD
£26.00
|
|
O/SIZE
£28.00
|
|||
|
|
Air con removal kit, consisting of 1 x Alloy Idler Pulley, CNC machined, Light weight designed to fit original bearing. The pulley is ribbed to allow the correct belt path as shown in the picture. 1 x belt - please specify std alternator pulley(1025) or oversize alternator pulley (1050) |
 |
£39.95
|
|
|
Alloy Crankshaft Pulley, CNC machined, Light weight to reduce power loss. |
 |
£119.00
|
|
|
Front Mounted Intercooler Kit, This is a DIY intercooler kit with 54mm stainless mandrel bent bends and samco hosing, giving you the major parts required to manufacture your own kit. Intercooler core 1 (pictured) is 650 x 165 x 80mm and fills lower grill area perfectly. Intercooler core 2 is 600 x 300 x 80mm for higher output vehicles Both above can be fitted whilst still retaing the air con radiator. |
 |
Core
1
£575.00
|
| Core
2
£625.00
|
|||
UK & EU Customers Please add VAT to all Prices
UPRATED ENGINE & GEARBOX INTERNALS - 3SGTE ENGINE
|
|
Camshafts - 264 & 272 Durations available. |
 |
£245.00
Each
|
|
|
Adjustable Cam Gears |
 |
£95.00
Each
|
|
|
Valve spring set |
£120.00
|
|
|
Genuine
Toyota
|
1ZZFE Valve lifter, shimless to reduce valvetrain weight |
£11.95
Each
|
|
|
Fidanza
|
Lightweight
Alluminium Adjustable Cam Gears
|
 |
£150.00 pair |
|
|
2.2 stroker kit - crank & pistons |
£1995.00
|
|
|
|
Forged piston kit - 87mm only |
£685.00
|
|
 |
JE Forged Piston Kit - (complete with Rings, Pins and clips - not shown) - 3 bore sizes available |
 |
86.0mm £485.00 |
|
86.25mm
£485.00
|
|||
|
86.5mm
£399.00
|
|||
 |
Ross Forged Piston Kit (complete with Rings, Pins and clips - not shown) - bore size 86mm & 86.5mm |
|
All
sizes £425.00
|
|
|
Steel Cylinder Head Gasket |
 |
1.2mm
£155.00
|
|
1.6mm
£165.00
|
|||
 |
Uprated Cylinder Head stud kit |
 |
£114.03
|
 |
Lightweight
Alluminium Flywheel
|
 |
£235.00 |
|
|
Replacement friction plate |
£40.00
|
|
|
|
Uprated Flywheel Bolt Kit |
£41.46
|
|
|
|
TRD Main Bearings and Con Rod Bearing kit |
£POA
|
|
|
Carrillo
|
Steel Conrods with bolts - set of 4 |
£599.00
|
|
|
Crower
|
Steel Conrods with bolts - set of 4 |
£599.00
|
|
|
Crower
|
Fensport Racing - Custom Steel Conrods with bolts - set of 4 - (special order 12 weeks) |
£699.00
|
|
|
|
Uprated Conrod Bolt Kit |
£34.65
|
|
|
|
Uprated Main Bearing Bolt Kit |
£84.85
|
|
|
KAAZ
|
5 Speed close ratio gear kit. 1st gear 3.231 2nd gear 2.235 3rd gear 1.667 4th gear 1.250 5th gear 0.964 We can build into your casing, if suitable for £325 + any neccessary parts for rebuild |
 |
£1495.00 |
|
|
Uprated selector fork - 3rd/4th gear - cast alloy bronze |
£299.00
|
|
|
|
Uprated selector fork - 5th gear - cast alloy bronze |
£299.00
|
|
|
|
5 Speed Straight cut dog engagement gear kit. Consisting of - Input shaft, output shaft, all gears straight cut dog engagemnet, oil pump gear and straight cut crown wheel and pinion with the following ratios 1st Gear 3.583 2nd Gear 2.045 3rd Gear 1.333 4th Gear 0.972 5th Gear 0.731 Reverse 3.545 3.933 Final drive (25mph per 1000rpm, ie 200mph at 8000rpm), also available with 4.4 Final drive(22.5mph per 1000rpm, ie 180mph at 8000rpm). The above is designed to work with indent type selectors and we can build into your casing, if suitable for £325+ bearings. |
£4995.00 |
|
|
Please
see Engine section for all other standard engine parts.
|
|||
UK & EU Customers Please add VAT to all Prices
ERL WATER INJECTION KITS
|
Recent
testing of Water Injection Systems have shown a stunning average reduction
of 24 degrees @ 18psi boost pressure. Show me an Intercooler upgrade
that can match this for price and performance
|
|
System 1s |
Comes with Race Pump, 3 jets and a Pressure Switch. Also included is all required hosing, relay and wiring. Ideal for Fast Road applications |
 |
£320.00
|
|
System 2c |
As with the '1s' kit above but also with High Speed Injector Valve for use with and Re-Programmable ECU |
 |
£420.00
|
|
System 2s |
As with the '1s' kit but also includes programmable MF2 Controller |
 |
£575.00
|
|
DDS2 |
Digital Dash Display System - This kit provides a Flow Sensor as well as a Led dash display unit, which provides the driver with vital flow information, helping to diagnose any problems with either blocked jets or lack of water for any reason - Highly Recommended for use with any of the above WI kits. |
 |
£107.00
|
UK & EU Customers Please add VAT to all Prices
REBUILT/UPRATED TOYOTA TURBOS
All Turbos are only available on Exchange - For Outright sales - Please enquire
|
The CT20 series turbo have 1 common problem - the turbine shaft is prone to breaking - therefore our uprated stage 1 & 2 CT20 turbos are fitted with a larger steel turbine shaft. |
|||
|
Stage 0 CT20 |
Rebuilt to standard specificationr using new parts as required - Fully balanced to OE standards Guide:- Standard Turbo |
 |
£525.00
|
|
Stage 1 CT20 |
Completely rebuilt using genuine new parts as required, New thicker steel shaft - 48mm compressor *Guide:- Ideal up to 1.2 bar boost on cars with standard injectors, and pistons etc, 1 bar boost available from 3,200 rpm - for power outputs up to 320bhp |
|
£695.00
|
|
Stage 2 CT20 |
Completely rebuilt using genuine new parts as required, New steel shaft - 48mm Compressor, 360 degree thrust, a choice of uprated actuator . *Guide:- Our top of the range CT20B, The choice for serious power, Ideal up to 1.5 bar boost, on cars with larger fuel injectors and forged pistons. 1 bar boost is available from 3,200 rpm, for power outputs up to 360bhp). |
 |
£795.00
|
|
Genuine
Toyota
|
Turbo complete gasket kit |
£79.82
|
|
|
Genuine
Toyota
|
Turbo to manifold gasket |
£16.49
|
|
|
Genuine
Toyota
|
Turbo to manifold studs (4) |
£1.25
Each
|
|
|
Genuine
Toyota
|
Turbo to manifold nuts (4) |
£1.36
Each
|
|
|
Genuine
Toyota
|
Turbo to downpipe gasket |
£16.94
|
|
|
Genuine
Toyota
|
Turbo to downpipe studs (7) |
£1.25
Each
|
|
|
Genuine
Toyota
|
Turbo to downpipe nuts (7) |
£2.53
Each
|
|
|
|
Cylinder Head to exhaust manifold - Repair Stud - The standard manifold stud sometimes comes undone, damaging the thread in the cylinder head - our Repair Stud is designed with an M11 x 1.25 thread on the head side and a M10 x 1.25 thread on the manifold side. This stud will enable you to repair the damaged head without the need for a helicoil. |
£6.95
Each
|
|
TURBO CONVERSIONS
|
TURBOCHARGERS Please note the following are generic turbo`s only and will require proffessional installation and additional work/parts to mount |
|||
|
|
Garrett GT28 - Internal Wastegate, complete with actuator & Flange, exhaust & Oil drain flanges. *Guide:- Our entry level garrett turbo, is ideal for cars which have outgrown the CT series power output, but still don`t want the lag associated with the larger turbo kits. 1 bar boost is available from 3,400 rpm, for power outputs up to 420bhp. |
 |
£995.00 |
|
|
Garrett GT3071R Ball Bearing Turbo - Internal wastegate with actuator - 0.64 AR Exhaust housing |
£825.00 |
|
|
|
Garrett GT3071R Ball Bearing Turbo - Internal wastegate with actuator - 0.86 AR Exhaust housing |
£825.00 |
|
|
|
Garrett GT3076 Ball Bearing Turbo - External Wastegate - 0.63 AR exhaust housing |
 |
£895.00 |
|
|
Garrett GT3076 Ball Bearing Turbo - External Wastegate - 0.82 AR exhaust housing |
|
£895.00 |
|
|
Garrett GT3082R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.63, 0.82 or 1.06 AR exhaust housing T3 Flange |
 |
£995.00 |
|
|
Garrett GT3542R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.63, 0.82 or 1.06 AR exhaust housing T3 Flange |
|
£1275.00 |
|
|
Garrett GT4088R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.85, 0.95, 1.05, or 1.19 AR exhaust housing T4 Split Pulse Flange |
 |
£1195.00 |
|
|
Garrett GT4094R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.85, 0.95, 1.05, or 1.19 AR exhaust housing T4 Split Pulse Flange |
|
£1195.00 |
|
MANIFOLDS AND FLANGE ADAPTORS |
|||
|
|
Aadapter to mount GT25/28 turbo to a standard manifold or corolla wrc manifold. Note: Turbine hosing needs mounting holes drilled out to suit 10mm studs..
|
 |
£79.95 |
|
|
Studs, Nuts, Weld on Flanges & Gaskets for above |
£POA |
|
|
AUSSIE EXHAUST |
Stainless Steel Tubular Manifold for CT20 turbo - ST205 fitment. This manifold keeps the original turbo in it's original location. |
 |
£550.00
|
|
|
50mm Remote Wastegate - comes as a kit with weld on flanges
|
 |
£495.00 |
|
TIAL
|
40mm Remote Wastegate - comes as a kit with weld on flanges |
£350.00 |
|
* Guide:- Our turbo guide is based on experience from tests on our own vehicles. Power outputs qoted are intended as a guide to choosing the correct turbo for your application. Power figures given are what the turbo can do, and may vary depending on other modifications done to the vehicle.
ENGINE MANAGEMENT
|
|
M4 ECU with Base map |
 |
£899.00 |
|
|
D9 Communication Lead |
£26.00
|
|
|
The above is all that is needed to run a ST205 and we have the calibration allowing you to retain the original map sensor which can read up to 1.8bar boost. Below are upgrade and fitting / mapping options available |
|
||
|
|
To install and map above - 1 day session suits most mildly modified vehicles |
£295.00
|
|
|
|
Future mapping sessions |
£45/HR
+ Expenses
|
|
|
|
Bruntingthorpe Proving Ground - Hire charge is £50+ vat per hour and a minimum of 2 hours apllies. Brutingthorpe is an ideal place to map extreme power cars or non road legal competition cars. Mapping charge is £45/HR + 2 hours travelling expenses. |
£
|
|
|
GM |
3 Bar map sensor - up to 2 bar boost |
£85.00
|
|
|
|
4 Bar map sensor - up to 3 bar boost |
£116.00
|
|
|
|
10 Position resistive rotary switch (Ideal for in car boost, ignition trim adjustment) |
£100.00
|
|
|
|
Thermocouple kit (For Exhaust Gas Temperature) - consisting of Probe, Amplifier and plugs |
£175.00
|
|
|
|
M4 PRO Upgrade - Data logging, Advanced Tuning, Anti lag, Launch Control etc |
£250.00
|
|
|
|
M4 Lambda Upgrade - (Pro upgrade a pre-requisite) |
£200.00
|
|
|
BOSCH |
Wideband Bosch Lambda Sensor |
£145.00
|
|
|
|
Lambda Boss & Bung |
£16.00
|
|
|
|
Professional Lambda meter, complete with wiring loom and lambda sensor |
£913.00
|
|
UK & EU Customers Please add VAT to all Prices