CHASSIS

UK & EU Customers Please add VAT to all Prices

SHOCK ABSORBER KITS

For true improvement to any cars handling adding uprated shock absorbers is essential

	Front Top Ajustable Shock Absorbers		£99.95 (Each)
	Rear Top Adjustable Shock Absorbers		£99.95 (Each)
	Front - Pressurized Gas Shock Absorbers		£56.50 (Each)
	Rear - Pressurized Gas Shock Absorbers		£56.50 (Each)

Note: Imports Beware - The above will fit to Rebuildable Struts only! Please check first.

The Bilstein Shocks below will fit all models including imports h

Bilstein Front	Bilstein Sport high pressure gas - complete Front strut		£139.00 (Each)
Bilstein Rear	Bilstein Sport high pressure gas - complete Rear strut		£139.00 (Each)

LOWERING SPRING KITS

Whether you want the sporty ride height or want to mildly improve handling adding lowered and uprated Springs is a good start - couple these with uprated shock absorbers and you will dramatically improve the cars handling

	Progressive Wound Coil Springs ideal for Fast Road use - Excellent ride quality - A complete set of 4, approx 30mm reduction in ride height		£120.00 (Early Spec MR2)
	Progressive Wound Coil Springs ideal for Fast Road use - Excellent ride quality - A complete set of 4, approx 40mm reduction in ride height		£120.00 (Early Spec MR2)
	Progressive Wound Coil Springs ideal for Fast Road use - Excellent ride quality - A complete set of 4, approx 20mm reduction in ride height		£120.00 (Late Spec MR2)
	Progressive Wound Coil Springs ideal for Fast Road use - Excellent ride quality - A complete set of 4, approx 30mm reduction in ride height		£120.00 (Late Spec MR2)
	Coil Springs ideal for Fast Road use - Excellent ride quality - A complete set of 4, approx 25mm reduction in ride height		£173.00

TEIN SUSPENSION

	Tein S.Tech spring kit, front 140lb and lowers -37mm, rear269lb and lowers -38mm		£190.00
	Tein Super Street coilover kit without upper mounts. Front spring rate 168lbs/in, rear 280lbs/in - alternative spring rates available - please ask. Adjustable ride height via the spring seat, lowering range front -10 to -45mm, rear-15 to -50mm. 16 position damping force adjustment (compression and rebound are adjusted simultaneously) Twin tube damper design for increased durability. The damper is rebuildable for repair, overhaul or revalving in the UK. This kit is compliant with the in car electronic damping controller EDFC to achieve 32 levels of adjustment		£700.00
	Tein Super Street coilover kit with upper mounts. Front spring rate 168lbs/in, rear 280lbs/in - alternative spring rates available - please ask. Adjustable ride height via the spring seat, lowering range front -10 to -45mm, rear-15 to -50mm. 16 position damping force adjustment (compression and rebound are adjusted simultaneously) Twin tube damper design for increased durability. The damper is rebuildable for repair, overhaul or revalving in the UK. This kit is compliant with the in car electronic damping controller EDFC to achieve 32 levels of adjustment		£890.00
	Tein Type Mono Flex coilover kit with upper mounts. Front spring rate 224lbs/in, rear 448lbs/in - alternative spring rates available - please ask. Spring preload and vehicle ride height are seperately adjustable via a fully threaded shell case - lowering range front -5 to -65mm, rear -5 to -65mm. 16 position damping force adjustment (compression and rebound are adjusted simultaneously) Twin tube damper design for increased durability. The damper is rebuildable for repair, overhaul or revalving in the UK. This kit is compliant with the in car electronic damping controller EDFC to achieve 32 levels of adjustment		£1580.00
	The EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force from inside the car via the 1/4 din size control panel		£240.00
	Tein Pillow Ball Tension Rods - adjust caster, eliminate toe change through acceleration and decelleration, and reduce unwanted play - front pair Rev 1		£240.00
	Tein Pillow Ball Tension Rods - adjust caster, eliminate toe change through acceleration and decelleration, and reduce unwanted play - front pair Rev 2 on		£210.00
	Tein Type HT Tarmac Racing coilover kit with pillow ball upper mounts. Front spring rate 224lbs/in, rear 504lbs/in Teins experience in tarmac racing has lead to the development of the HT Damper for gymhkana and auto-x competitions, The damper and spring rates are chosen for optimal grip on tight courses. Seperate compression and rebound adjustment (16x16) enable fine tuning to match any driver style under any conditions. The damper is rebuildable for repair, overhaul or revalving in the UK.		£POA

ANTI-ROLL BARS

	Uprated Front Anti-Roll Bar (22.2mm) complete with TRD bushes		£154.00
	Uprated Rear Anti-Roll Bar (22.2mm) complete with TRD bushes		£154.00
	Uprated 20mm Front Anti roll bar - non adjustable		£108.82
	Uprated 20mm Front Anti roll bar - 3 position adjustable		£108.82
	Uprated 20mm Rear Anti roll bar - non adjustable		£108.82
	Uprated 20mm Rear Anti roll bar - 3 position adjustable		£116.14
	Camber adjusting bolt kit - Front - allows up to +/- 1.5 degrees of adjustment		£39.86 Pair
	Camber adjusting bolt kit - Rear - allows up to +/- 1.5 degrees of adjustment		£39.86 Pair

SUPERFLEX ADVANCED POLYURETHANE BUSH KITS

Superflex bushes are engineered to be 25-30% stiffer than standard new rubber bushes. They will make a dramatic improvement to your cars handling without destroying ride quality - Click Here for fitment guide & info

A = F1330	Front track control arm inner bush kit [2 bushes in kit] - Early 14" Wheel model only	£23.98
A = TRD	Heavy Duty Rubber inner track control arm bush - Early 14" Wheel model only	£32.00 pair
D = F699/19	Rev 1 (14" wheel) Front tie rod [2 bushes in kit]	£20.21
D = TRD	Rev 2 on (15" wheel) Front tie rod [2 bushes in kit] - TRD Heavy Duty Rubber -	£64.86 pair
C = F660/17/18/19	Front anti-rollbar to chassis kit [2 bushes in kit] **	£13.78
E = F823 x 0.5	Rear trailing arm to chassis [2 bushes in kit]	£31.25
H = F661/17/18/19	Rear anti-rollbar to chassis kit [2 bushes in kit] **	£13.68
J = F699/22	Rear trailing arm to track control arm [2 bushes in kit]	£20.21

** Note: Please measure anti roll bar diameter before ordering - We have 17, 18, 19mm available Front and Rear

STRUT BRACES

	Front upper strut brace- To improve Chassis rigidity - 3 point fixing - steel		£119.00
	Rear upper strut brace - To improve Chassis rigidity - 4 point fixing - steel		£159.00

TOP MOUNTS

	Heavy Duty Front Suspension Top Mounts - Rev 1&2		£40.00Each
	Heavy Duty Front Suspension Top Mounts - Rev 3		£40.00 Each
	Heavy Duty Rear Suspension Top Mounts		£40.00 Each Info

ENGINE & GEARBOX MOUNTS - HEAVY DUTY RUBBER

	Front Gearbox Mount - 3SGTE		£44.00
	Rear Gearbox Mount - 3SGTE		£44.00
	Engine Mount R/H Cambelt end- 3SGTE		£63.00
	Upper Gearbox Mount L/H - 3SGTE As for 89.10 - 97.10 vehicles, the below-mentioned genuine part is necessary. 3S-GE car/bracket: 12325-74121×1 and bolt: 90119-12343×1 3S-GTE car/bracket: 12325-74131×1 and bolt: 90119-12325×1		£55.00
	Front Gearbox Mount - 3SGE		£44.00
	Rear Gearbox Mount - 3SGE		£44.00
	Engine Mount R/H Cambelt end- 3SGE		£63.00
	Upper Gearbox Mount L/H - 3SGE As for 89.10 - 97.10 vehicles, the below-mentioned genuine part is necessary. 3S-GE car/bracket: 12325-74121×1 and bolt: 90119-12343×1 3S-GTE car/bracket: 12325-74131×1 and bolt: 90119-12325×1		£55.00

STANDARD REPLACEMENT PARTS

Outer Track Rod End - L/H		£56.00
Outer Track Rod End - R/H		£56.00
Inner Track Rod & Joint - without pas		£19.95
Lower Ball Joint - Front		£31.00
Lower Ball Joint - Rear		£26.00
Antiroll bar link - Front		£52.00
Antiroll bar link - Rear		£48.00

LSD UNITS

For the serious driver the TRD LSD unit will improve traction and ultimately the handling of you car

LSD - Mechanical 1.5 way (can be changed to 2 way without additional parts)

3S-GE, N/A Models

£499.00

LSD - Mechanical 1.5 way (can be changed to 2 way without additional parts)

Turbo Models

£525.00

UK & EU Customers Please add VAT to all Prices