ENGINE TUNING
UK & EU Customers Please add VAT to all Prices
NORMALLY ASPIRATED TUNING - 3SGE ENGINE
 |
Platinum
Sparkplugs - heat range 6 & 7 are available
|
 |
£5.95
each
|
||
|
|
Iridium
Sparkplugs - heat range 6, 7, 8 & 9 are available
|
|
£7.95
each
|
||
 |
Iridium
Sparkplugs - heat range 7&8 are available
|
|
£12.50
each
|
||
 |
Iridium
Sparkplugs - heat range 6,7 & 8 available
|
|
£12.50
each
|
||
 |
Full
suppression 8mm blue silicon leads complete with original ends - The
best leads we have seen - Early Spec cars
|
|
£52.50
|
||
| Full suppression 5mm red silicon leads complete with original ends - The best leads we have seen - Late Spec cars |
£62.50
|
||||
|
High Performance Foam Air Filter Element - please state rev 1,2 or 3 |
 |
£24.50
|
||
|
|
Fits
direct to original intake hose, with built in rampipe, and facility
for air temp sensor - Please state early 158BHP engine or later 173BHP
|
 |
£59.99
|
||
|
|
Special cleaning kit for the RAMAIR Air Filter |
£4.99
|
|||
|
|
Blitz SUS Power LM filter Element - fits directly into original airbox - please state rev 1,2 or 3 |
 |
£26.00
|
||
|
|
Induction Filter Kit - Fits direct to original intake hose, with Rampipe and facility for Air Temp Sensor |
 |
£105.00 |
||
|
|
High Flow Sports Oil Filters |
 |
£13.60
|
||
|
|
TRD Low Temperature Sports Thermostat, opening temperature is reduced to 71 degrees C. |
 |
Rev 1& 2 £38.50 |
||
|
Rev 3 £46.50 |
|||||
 |
Speed
Limit Defencer - removes speed cut on import models
|
£95.00
|
|||
|
Superchips
ICON
|
Reprogrammes
your engines Ignition Advance Curve giving approximately 8 BHP increase
at 4,500rpm. Improved Power/Torque and throttle response From 3,000rpm,
Easily fitted into wiring loom just ahead of ecu.
|
 |
£200.00 |
||
|
Power
Boost Valve
|
Adjustable
Fuel Pressure Regulator with remote mounting kit
|
 |
£86.00
|
||
 |
High capacity Fuel pump kit 176L/HR |
£76.90
|
|||
|
|
High capacity Fuel pump kit 255L/HR |
£79.80
|
|||
|
|
Alloy Alternator Pulley, CNC machined, Light weight to reduce power loss. |
 |
£26.00
|
||
|
|
Alloy Crankshaft Pulley, CNC machined, Light weight to reduce power loss. |
 |
£119.00
|
||
 |
Lightweight
Alluminium Flywheel
|
 |
£235.00 |
||
|
|
Camshafts - 256, 264 & 272 Durations available. |
 |
£245.00
Each
|
||
|
|
Adjustable Cam Gears |
 |
£95.00
Each
|
||
|
|
Valve spring set |
£120.00
|
|||
|
|
Lightweight
Alluminium Adjustable Cam Gears
|
 |
£150.00 pair |
||
|
For
more power upgrades for normally aspirated cars please see conversions
|
|||||
UK & EU Customers Please add VAT to all Prices
TURBO TUNING - 3SGTE ENGINE
|
|
Platinum
Sparkplugs - heat range 6 & 7 are available
|
|
£5.95
each
|
||
|
|
Iridium
Sparkplugs - heat range 6, 7, 8 & 9 are available
|
|
£7.95
each
|
||
|
|
Iridium
Sparkplugs - heat range 7&8 are available
|
|
£12.50
each
|
||
|
|
Iridium
Sparkplugs - heat range 6,7 & 8 available
|
|
£12.50
each
|
||
|
For Early model cars with 7mm std |
Full
suppression 8mm blue silicon leads complete with original ends - For
Early models
|
|
£49.95
|
||
| Full suppression 8.5mm red silicon leads complete with original ends - For Early models |
£62.50
|
||||
|
For Late model cars with 5mm std |
Full suppression 5mm red silicon leads complete with original ends - For Late models |
£62.50
|
|||
| Full suppression 8.5mm Red silicon leads to convert late cars to 8.5mm |
£69.99
|
||||
|
|
High Performance Foam Air Filter Element - please state rev 1,2 or 3 |
|
£24.50
|
||
|
|
Special cleaning kit for the RAMAIR Air Filter |
£4.99
|
|||
|
|
Complete Induction kit for earlier model cars with airflow meter - rev 1 & 2 |
|
£125.00 |
||
| Complete Induction kit for later model cars with map sensor - rev 3 |
£155.00
|
||||
|
|
Blitz SUS Power LM filter Element - fits directly into original airbox - please state rev 1,2 or 3 |
|
£26.00
|
||
|
|
Blitz Super Sound Dump Valve - Complete kit |
 |
£185.00
|
||
|
|
High Flow Sports Oil Filters |
|
£13.60
|
||
|
|
TRD Low Temperature Sports Thermostat, opening temperature is reduced to 71 degrees C. |
|
Rev 1& 2 £38.50 |
||
|
Rev 3 £46.50 |
|||||
|
|
Alloy Alternator Pulley, CNC machined, Light weight to reduce power loss. |
|
£26.00
|
||
|
|
Alloy Crankshaft Pulley, CNC machined, Light weight to reduce power loss. |
|
£119.00
|
||
|
|
Super sequential blow off valve |
 |
£215.00
|
||
|
|
Speed
Limit Defencer - removes speed cut on import models
|
£85.00
|
|||
|
|
Fuel
Cut Defencer - Comes with fitting Instructions. Easy and cost effective
way of removing the Boost cut. The item has a 4 wire connection just
ahead of the ECU making it very simple to install
|
£85.00
|
|||
|
|
Alloy
Bleed Valve - Improved Design featuring a locking mechanism. Easy to
use just set desired pressure then lock (No more unwanted adjustments)
|
£27.50 |
|||
|
|
Fuel Cut Defencer - Comes with fitting Instructions. Easy and cost effective way of removing the Boost cut. The item has a 4 wire connection just ahead of the ECU making it very simple to install |
£85.00
|
|||
|
|
Uprated Actuator - CNC Machined, Kevlar Diaphragm with adjustable stainless steel rod, T piece & circlip |
 |
£99.95
Info
|
||
|
|
Electronic Boost Controller - Spec S - Single solenoid |
£219.00
Info
|
|||
|
|
Electronic Boost Controller -Spec R - Dual solenoid |
£310.00
Info
|
|||
|
|
Electronic Boost Controller - SBC-ID Boost Controller II - Dual solenoid |
£360.00
Info
|
|||
|
|
MMD I-Colour, Display upgrade for SBC-ID boost controller |
£290.00
|
|||
|
|
Electronic Boost Controller - SBC I-Colour |
£499.00
|
|||
|
|
AF Analyser - allows you to read wide band lambda, works with the MMD I - Colour or SBC I-Colour |
£360.00
|
|||
|
|
Power meter SJ |
£110.00
|
|||
|
Power
Boost Valve
|
Adjustable
Fuel Pressure Regulator with remote mounting kit, ideal for use with
standard type fuel lines.
|
|
£86.00
|
||
|
|
Adjustable fuel pressure regulator - ideal for use with upgraded fuel lines |
£115.00
|
|||
|
|
High capacity Fuel pump kit 176L/HR |
£76.90
|
|||
|
|
High capacity Fuel pump kit 255L/HR |
£79.80
|
|||
|
|
Blitz 850cc side feed injectors |
 |
£105.00
Each
|
||
|
Genuine
Toyota
|
Revision 3, 3SGTE side feed injectors 540cc - fits original fuel rail. |
£137.00
Each
|
|||
|
|
Top Feed Injectors 1000cc (requires fuel rail upgrade) Rev 3 only |
£145.00
Each
|
|||
|
|
Fuel rail upgrade for above top feed injectors Rev 3 only |
£225.00
|
|||
|
|
Alloy Oil Breather/Catch Can, with oil drain plug & sight level, 1 Litre capacity. Outlets can be left or righthand..Now chrome plated |
 |
£85.00
|
||
|
Pipercross
|
Pipercross Breather filter - Blue/red/Polished available |
 |
£18.00
|
||
 |
Silicone COOLANT hoses, 8 hoses, Rev 1&2 |
 |
£122.00
|
||
|
Hose
Clips
|
12 x Stainless Steel Hose Clips - for above intake hoses |
£13.80
|
|||
|
|
Silicone COOLANT hoses, 7 hoses, Rev 3 |
|
£102.00
|
||
|
Hose
Clips
|
12 x Stainless Steel Hose Clips - for above intake hoses |
£12.80
|
|||
|
|
Silicone intercooler hoses, From turbo 4 hoses |
 |
£82.00
|
||
|
Hose
Clips
|
10 x Stainless Steel Hose Clips - for above intake hoses |
£14.90
|
|||
|
|
Silicone Induction hose from airflow meter to turbo |
 |
£91.00
|
||
|
Hose
Clips
|
8 x Stainless Steel Hose Clips - for above intake hoses |
£10.54
|
|||
|
|
Ancillary Hose kit, 9 hoses |
£120.00
|
|||
|
|
Intercooler Upgrade Kit with hard pipes |
 |
£750.00
|
||
UK & EU Customers Please add VAT to all Prices
UPRATED ENGINE INTERNALS - 3SGTE ENGINE
|
|
Camshafts - 256, 264 & 272 Durations available. |
|
£245.00
Each
|
|
|
Adjustable Cam Gears |
|
£95.00
Each
|
|
|
Valve spring set |
£120.00
|
|
|
Genuine
Toyota
|
1ZZFE Valve lifter, shimless to reduce valvetrain weight |
£11.95
Each
|
|
|
|
Lightweight
Alluminium Adjustable Cam Gears
|
|
£150.00 pair |
|
|
2.2 stroker kit - crank & pistons |
£1995.00
|
|
|
|
Forged piston kit - 87mm only |
£685.00
|
|
 |
JE Forged Piston Kit - (complete with Rings, Pins and clips - not shown) - 3 bore sizes available |
 |
86.0mm
£485.00
|
|
86.25mm
£485.00
|
|||
|
86.5mm
£399.00
|
|||
 |
Ross Forged Piston Kit (complete with Rings, Pins and clips - not shown) - bore size 86mm & 86.5mm |
|
All
sizes £425.00
|
|
|
Steel Cylinder Head Gasket - Rev 1 & 2 |
 |
1.2mm
£98.00
|
|
1.4mm
£98.00
|
|||
|
|
Steel Cylinder Head Gasket - Rev 1 & 2 |
|
1.0mm
£155.00
|
|
1.6mm
£175.00
|
|||
|
|
Steel Cylinder Head Gasket - Rev3, 94 on |
|
1.2mm
£155.00
|
|
1.6mm
£165.00
|
|||
 |
Uprated Cylinder Head stud kit |
 |
£114.03
|
|
|
Lightweight
Alluminium Flywheel
|
|
£235.00 |
|
|
Uprated Flywheel Bolt Kit |
£41.46
|
|
|
|
TRD Main Bearings and Con Rod Bearing kit |
£POA
|
|
|
Carrillo
|
Steel Conrods with bolts - set of 4 |
£599.00
|
|
|
Crower
|
Steel Conrods with bolts - set of 4 |
£599.00
|
|
|
Crower
|
Fensport Racing - Custom Steel Conrods with bolts - set of 4 - (special order 12 weeks) |
£699.00
|
|
|
|
Uprated Conrod Bolt Kit |
£34.65
|
|
|
|
Uprated Main Bearing Bolt Kit |
£84.85
|
|
|
KAAZ
|
5 Speed close ratio gear kit. 1st gear 3.231 2nd gear 2.235 3rd gear 1.667 4th gear 1.250 5th gear 0.964 We can build into your casing, if suitable for £325 + any neccessary parts for rebuild |
 |
£1495.00 |
|
|
Uprated selector fork - 3rd/4th gear - cast alloy bronze |
£299.00
|
|
|
|
Uprated selector fork - 5th gear - cast alloy bronze |
£299.00
|
|
|
|
5 Speed Straight cut dog engagement gear kit. Consisting of - Input shaft, output shaft, all gears straight cut dog engagemnet, oil pump gear and straight cut crown wheel and pinion with the following ratios 1st Gear 3.583 2nd Gear 2.045 3rd Gear 1.333 4th Gear 0.972 5th Gear 0.731 Reverse 3.545 3.933 Final drive (25mph per 1000rpm, ie 200mph at 8000rpm), also available with 4.4 Final drive(22.5mph per 1000rpm, ie 180mph at 8000rpm). The above is designed to work with indent type selectors and we can build into your casing, if suitable for £325+ bearings. |
£4995.00 |
|
|
Please
see Engine section for all other standard engine parts.
|
|||
UK & EU Customers Please add VAT to all Prices
PERFORMANCE PACKAGES FOR TURBO
Packages designed to give you an idea on where to start ( all parts available seperately above)
|
Stage 1 +35 bhp |
Fuel Cut Defenser, Ramair Air Filter, Alloy Bleed Valve, colder grade Spark Plugs - Boost increases up to 15psi |
£180.00 |
|
|
Stage 2 +45 bhp |
Consists of Stage 1 + Mongoose Exhaust System to improve midrange torque and reduce Turbo lag. Further gains can be had by removing the Cat |
£495.00
|
|
|
Stage 3 +50 bhp |
As Stage 2 but with Uprated Actuator to further enhance Turbo response |
£585.00
|
|
|
Stage 4 +??? bhp |
Taylor made conversion packages to suit many tastes and budgets |
£POA
|
|
REBUILT/UPRATED TURBOS
All Turbos are sold on an exchange basis- A £150 Refundable surcharge will apply
For Outright sales - Please enquire
|
Rev 1&2 CT26 up to 94 |
|||
|
Stage 0 CT26 |
Completely rebuilt using new parts as required, New steel shaft - Fully rebuilt & balanced to OE standards Guide:- Standard Turbo |
 |
£475.00
|
|
Stage 1 CT26 |
Completely rebuilt using New Steel shaft and larger compressor wheel - rebuilt and balanced to racing standards with a choice of uprated actuator. Guide: - Ideal for cars running up to 1Bar boost, full boost available from 2,800 rpm, power up to 270bhp. |
 |
£575.00
|
|
Stage 2 CT26 |
Completely rebuilt using New Steel shaft and 48mm compressor wheel - rebuilt & balanced to racing standards, 12 psi uprated actuator Guide:- Ideal up to 1.2 bar boost on cars with standard injectors, and pistons etc, full boost available from 3,000 rpm, power up to 290bhp. |
 |
£695.00
|
|
Stage 3 CT26 |
Completely rebuilt using New Steel shaft and 48mm compressor wheel - rebuilt & balanced to racing standards, Choice of uprated actuator - 360 degree Thrust bearing. Guide:- Our top of the range CT26, The choice for serious power, Ideal up to 1.5 bar boost, on cars with larger fuel injectors and forged pistons. Full boost is available from 3,200 rpm.power up to 360bhp. |
|
£795.00
|
|
For Revison 3, 1994 on cars the CT20B series turbo have 1 common problem - the turbine shaft is prone to breaking - therefore our uprated stage 1 & 2 CT20 turbos are fitted with a larger steel turbine shaft. |
|||
|
Stage 0 CT20 |
Rebuilt to standard specificationr using new parts as required - Fully balanced to OE standards Guide:- Standard Turbo |
|
£525.00
|
|
Stage 1 CT20 |
Completely rebuilt using genuine new parts as required, New thicker steel shaft - 48mm compressor *Guide:- Ideal up to 1.2 bar boost on cars with standard injectors, and pistons etc, 1 bar boost available from 3,200 rpm - for power outputs up to 320bhp |
|
£695.00
|
|
Stage 2 CT20 |
Completely rebuilt using genuine new parts as required, New steel shaft - 48mm Compressor, 360 degree thrust, a choice of uprated actuator . *Guide:- Our top of the range CT20B, The choice for serious power, Ideal up to 1.5 bar boost, on cars with larger fuel injectors and forged pistons. 1 bar boost is available from 3,200 rpm, for power outputs up to 360bhp). |
|
£795.00
|
|
Genuine
Toyota
|
Turbo complete gasket kit - rev 1&2 |
£98.04
|
|
|
Genuine
Toyota
|
Turbo complete gasket kit - rev 3 |
£79.82
|
|
|
Genuine
Toyota
|
Turbo to manifold gasket |
£16.49
|
|
|
Genuine
Toyota
|
Turbo to manifold studs |
£1.25
Each
|
|
|
Genuine
Toyota
|
Turbo to manifold nuts |
£1.36
Each
|
|
|
Genuine
Toyota
|
Turbo to downpipe gasket |
£16.94
|
|
|
Genuine
Toyota
|
Turbo to downpipe studs |
£1.25
Each
|
|
|
Genuine
Toyota
|
Turbo to downpipe nuts |
£2.53
Each
|
|
|
|
Cylinder Head to exhaust manifold - Repair Stud - The standard manifold stud sometimes comes undone, damaging the thread in the cylinder head - our Repair Stud is designed with an M11 x 1.25 thread on the head side and a M10 x 1.25 thread on the manifold side. This stud will enable you to repair the damaged head without the need for a helicoil. |
£6.95
Each
|
|
UK & EU Customers Please add VAT to all Prices
|
TURBOCHARGERS Please note the following are generic turbo`s only and will require proffessional installation and additional work/parts to mount |
|||
|
|
Garrett GT28 - Internal Wastegate, complete with actuator & Flange, exhaust & Oil drain flanges. *Guide:- Our entry level garrett turbo, is ideal for cars which have outgrown the CT series power output, but still don`t want the lag associated with the larger turbo kits. 1 bar boost is available from 3,400 rpm, for power outputs up to 420bhp. |
 |
£995.00 |
|
|
Garrett GT3071R Ball Bearing Turbo - Internal wastegate with actuator - 0.64 AR Exhaust housing |
£825.00 |
|
|
|
Garrett GT3071R Ball Bearing Turbo - Internal wastegate with actuator - 0.86 AR Exhaust housing |
£825.00 |
|
|
|
Garrett GT3076 Ball Bearing Turbo - External Wastegate - 0.63 AR exhaust housing |
 |
£895.00 |
|
|
Garrett GT3076 Ball Bearing Turbo - External Wastegate - 0.82 AR exhaust housing |
|
£895.00 |
|
|
Garrett GT3082R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.63, 0.82 or 1.06 AR exhaust housing T3 Flange |
 |
£995.00 |
|
|
Garrett GT3542R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.63, 0.82 or 1.06 AR exhaust housing T3 Flange |
|
£1275.00 |
|
|
Garrett GT4088R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.85, 0.95, 1.05, or 1.19 AR exhaust housing T4 Split Pulse Flange |
 |
£1195.00 |
|
|
Garrett GT4094R Ball Bearing Turbo - External Wastegate - Ported Shroud Available with 0.85, 0.95, 1.05, or 1.19 AR exhaust housing T4 Split Pulse Flange |
|
£1195.00 |
|
MANIFOLDS AND FLANGE ADAPTORS |
|||
|
|
Aadapter to mount GT25/28 turbo to a standard manifold or corolla wrc manifold. Note: Turbine hosing needs mounting holes drilled out to suit 10mm studs..
|
 |
£79.95 |
|
|
Studs, Nuts, Weld on Flanges & Gaskets for above |
£POA |
|
|
AUSSIE EXHAUST |
Stainless Steel Tubular Manifold for CT26 turbo. Will fit 7 or 9 bolt type cylinder head - Rev 1 & 2. |
 |
£550.00
|
|
AUSSIE EXHAUST |
Stainless Steel Tubular Manifold for CT20 turbo. Will fit 8 bolt type cylinder head - Rev 3. |
|
£550.00
|
|
|
50mm Remote Wastegate - comes as a kit with weld on flanges
|
 |
£495.00 |
|
TIAL
|
40mm Remote Wastegate - comes as a kit with weld on flanges |
£350.00 |
|
* Guide:- Our turbo guide is based on experience from tests on our own vehicles. Power outputs qoted are intended as a guide to choosing the correct turbo for your application. Power figures given are what the turbo can do, and may vary depending on other modifications done to the vehicle.
ERL WATER INJECTION KITS
|
Recent
testing of Water Injection Systems have shown a stunning average reduction
of 34 degrees @ 18psi boost pressure. Show me an Intercooler upgrade
that can match this for price and performance
|
|
System 1s |
Comes with Race Pump, 3 jets and a Pressure Switch. Also included is all required hosing, relay and wiring. Ideal for Fast Road applications |
 |
£320.00
|
|
System 2c |
As with the '1s' kit above but also with High Speed Injector Valve for use with and Re-Programmable ECU |