Avo Turbo Kit - Stage 3 - Billet Turbocharger
Ceramic Coated Manifold and Turbo
The stage 3 Billet version has a 360 degree thrust bearing for improved strength when running higher boost and offers a 20% increase in airflow over the stage 1 & 2.
Looking for forced induction for your GT86 & BRZ? The Avo Turboworld base turbo kit for the Toyota GT86 and Subaru BRZ offers the enthusiast and professional race team a very cost effective solution!
The turbo kit is designed as a full bolt on with no cutting or welding required, and retains the original front bumper reinforcing beam "crash bar".
This specially designed AVO18/49 Billet turbocharger comes with a 6 psi actuator for precise boost control at lower psi levels, ensuring engine longevity.
The turbocharger is rated for 450hp of flow, so there is certainly headroom available for future tuning.
This is the turbo we used to make 421bhp on stock internals at just 1 bar of boost on our GT86R.
Mechanical Oil Pump Specifications:
We are unique in utilizing a mechanical oil pump that we locate at the back of the engine,running off the back of the RH camshaft. There is also a oil reservoir tank, to the right of the turbocharger itself. This is the most reliable way to lift oil back to the engine, as it keeps the flow rate tied to the rpm speed of the motor, ensuring that it's properly scavenged at low rpms and idling, and has enough at high rpms.
Bar & Plate construction with cast end tanks 480 x 203 x 75mm
Intercooler pipework uses black wire-reinforced silicone piping and two black powdercoated steel piping. The intake piping has ports to mount up a variety of blow-off valves, even OEM ones for a full stealth look.
• Oil and water-cooled Turbocharger
• Unequal Length Exhaust Manifold
• FMIC and all necessary piping
• Blow Off Valve (Dumpvalve) & PCV Valve
• 3" Turbocharger Outlet Pipe
• Mechanical Oil Pump
• Oil reservoir tank
• All assorted hoses, clamps & necessary fittings
Avo Turboworld 50/50 dumpvalve (199 + vat)
Or Forge Dumpvalve (110 + vat)
Avo Turboworld "Race Breather System" (199 + vat)
3 bar map Sensor & overboost fuel cut (89.95 + vat)
Electronic 3 port boost vsv (63+ vat)
Exhausts and de cats please enquire or see our Exhaust System page.
We recommend a 2.5" exhaust as a minimum for power levels up to 285bhp after this we recommend 3".
Trade enquiries welcome.
We offer a full fitting service, please call for a quotation, and we also provide a mapping service using EcuTek software, please check our "Engine Management" page for details.