Water Injection Kit - ERL System - HFS-V3.1

  • Sale: 0% Off
  • Regular price £686.24 (Ex-vat : £571.87)

Stock status: Not in Stock - You can still order this item, if you order today we expect to have the item ready for shipping in : 14-35 Days


*SPECIAL ORDER ITEM* - Click to learn more


ERL Water Injection Kit System HFS-V3.1

Failsafe Water/Meth injection :) For years people have used water injection, however there has always been that worry that what if it fails? Should you map for it? Now we have the HFSV3-3 kit from Aquamist and have developed failsafe mapping for Ecutek with custom RaceRom maps and also Link & Motec Ecu's. The system is so good and instantly reacts, we can hold the car on full throttle and literally switch the WI on and off, the maps change instantly allowing us to turn WI in to the "Power Adder" it should be! :)

The Aquamist system has a 0-5v output based on water flow, which we can use to switch maps when linked to a programmable ecu, allowing the correct calibration of fuel & ignition as well as map switching and boost or throttle reduction if required :)

Aquamist has been pioneering the IDC based water injection system since 2003 with great success. The HFS3-pwm system is designed to complete the Aquamist’s PWM-valve delivery system line-up, it allows precise metering of water/methanol injection for the modern high performance engine. The dash gauge, flow sensor and “Plug and Play” features are standard to minimise installation time.

The system retrieves the fuel flow (IDC) and manifold pressure signals (MPS) from the engine management system as the prime source to control the flow of water. This enables perfect balance of water to fuel flow under all engine loads. The system can also be controlled by a third-party ECU with its own custom water/methanol flow map.

A “Fast Acting Valve” (FAV) controls the delivery rate based on the PWM signal from the HFS-3 controller. A constant line pressure (160 psi) is provided by the Aquatec pump working in the “by-pass” mode. A PWM valve system guarantees wide dynamic range.

The HFS-V3.1 kit comes with a pre wired harness to simplify installation.

 


  • Nissan 180-200SX-S13
  • Nissan 200SX S14 - 10/93> 01/99
  • Nissan 200SX S15 - 01/99> 08/02
  • Nissan Skyline GTR R32 08/89> 11/94
  • Nissan Skyline GTR R33 01/95> 01/99
  • Nissan Skyline GTR R34 01/99> 08/02
  • Nissan Skyline GTS R32 05/89> 08/93
  • Nissan Skyline GTS R33 08/93> 05/98
  • Nissan Skyline GTT R34 06/98> 06/01
  • Nissan Stagea C34 09/96> 10/01
  • Special order
  • Subaru BRZ 2012 On
  • Subaru BRZ 2017 On BRZ
  • Toyota Aristo 3.0 TT Vertex - JZS147 - 10/91> 08/97
  • Toyota Aristo 3.0 TT Vertex - JZS161 - 08/97> 12/04
  • Toyota Celica GT4 ST165 01/88> 12/90
  • Toyota Celica GT4 ST185 10/89> 03/94
  • Toyota Celica GT4 ST205 02/94> 08/99
  • Toyota GT86 2012 to 2016
  • Toyota GT86 2017 On
  • Toyota JZX100 2.5 Turbo 09/96> 06/01
  • Toyota JZX110 2.5 Turbo 10/00> 06/07
  • Toyota JZX90 2.5 Twin Turbo 10/92> 08/96
  • Toyota Levin / Trueno 1.6 Supercharged AE101 06/91> 05/95
  • Toyota Levin / Trueno 1.6 Supercharged AE92 05/87> 06/91
  • Toyota MR2 MK1 AW11 06/84> 08/86
  • Toyota MR2 MK1 AW11 Supercharger 08/86> 12/89
  • Toyota MR2 Turbo Rev 1 3S-GTE 12/89> 12/91
  • Toyota MR2 Turbo Rev 2 3S-GTE 12/91> 11/93
  • Toyota MR2 Turbo Rev 3 3S-GTE 11/93> 08/99
  • Toyota Soarer 2.5 Twin Turbo JZZ30 05/91> 06/99
  • Toyota Starlet 1.3 Turbo EP82 4E-FTE 12/89> 12/95
  • Toyota Starlet 1.3 Turbo EP91 4E-FTE 01/96> 12/99
  • Toyota Supra 2.0 Twin Turbo GA70 1G-GTE 02/86> 05/93
  • Toyota Supra 2.5 Twin Turbo JZA70 1JZ-GTE 08/90> 05/93
  • Toyota Supra 3.0 Turbo MA70 7M-GTE 01/89> 09/93
  • Toyota Supra 3.0 Twin Turbo JZA80 2JZ-GTE 05/93> 08/02
- Water tank not included.